Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Window Replacement Across Enterprise
If your windows are fogging, sticking, or letting the desert heat straight through, we can help. We’re Jasper Windows & Doors, and we work with homeowners across Enterprise on window replacement done the right way – inspection first, product second, install last. Our technicians have up to 10 years of experience, and they know what southern Nevada’s sun does to a west-facing pane. Call (844) 761-6772 to set up a free estimate.
Why Enterprise Homeowners Call Jasper Windows & Doors for Window Replacement
We’re a windows-and-doors specialist, not a general contractor who occasionally touches glass. That focus matters in Enterprise, where almost every job starts with the same thing: builder-grade vinyl from the original construction, not wood or steel sash that needs restoring. Our team handles window replacement across southern Nevada and carries eight manufacturer lines, so the recommendation comes from what your home actually needs rather than what a distributor is pushing that month.
Homeowners in Enterprise call us because we open the wall before we quote the job. Pulling an original vinyl unit from a 2000s-2010s tract home often exposes damaged framing, failed flashing, and occasionally wiring that no longer meets current code once a permit is pulled. We inspect first, write allowances into the contract, and price any surprise in writing before we touch it. That’s how a project stays on budget. Call (844) 761-6772 for a free estimate.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Window Glass Replacement in Enterprise
Window Glass Replacement in Enterprise usually means swapping the insulated glass unit inside a frame that’s still sound – a far cheaper path than a full window when the vinyl and sash are intact. On these south-valley homes, that’s most often a fogged west- or south-facing second-story pane, where the afternoon sun cooked the original dual-pane unit first. Replacing the unit restores the clear view and the thermal break without pulling the frame.
Typical cost runs $250 to $600 per insulated glass unit in Enterprise, depending on size, glazing type, and whether it’s on the second story. If only one pane has clearly failed, we’ll tell you – we won’t sell you four units when one is the problem.
What a Fogged Pane Tells You
A hazy, milky pane means the seal between the two panes has failed and moisture has gotten in. Once that happens, the argon fill is gone and the window is no longer insulating the way it was built to. The glass can be replaced without disturbing the frame in most cases.
Sizing the Glass to the Exposure
On hot exposures, we can specify low-E glass that reduces solar heat gain instead of just replacing the unit with identical glazing. A west-facing second-story window takes the worst load of the day, and the right coating makes a measurable difference in what the room feels like at 4pm. Ask us to compare the options before you commit.
Window Sash Replacement in Enterprise
Window Sash Replacement in Enterprise covers the moving parts – the frame-and-glass assembly that slides or cranks inside the outer frame – when the sash itself has warped, the weatherstrip has degraded, or a hinge or balance has failed. On builder vinyl from the 2000s, the sash is usually the first component to go, well before the surrounding frame does. Replacement lets you keep a sound outer frame and fix the part that actually stopped working.
Typical sash replacement in Enterprise runs $400 to $900 per window, depending on size and whether the failure is weatherstrip and hardware or full sash removal and re-set. Tall two-story glazing runs toward the higher end.
When the Sash, Not the Glass, Is the Problem
If the glass is clear but the window won’t seal, sticks, or lets dust blow in during a monsoon, the sash and its weatherstrip are the likely culprit. Replacing the sash restores the seal without the cost and disruption of a full unit swap. It’s worth a look before you assume the whole window is gone.
Hardware That’s Stopped Working
Cranks, hinges, and balances take a beating on tall second-story windows. When the operator fails, the sash often can’t be repaired to hold a seal. Replacing the sash assembly resolves the movement and the seal at once, and it’s usually faster than chasing individual parts on an older unit.
Trusted Brands We Service in Enterprise
We carry eight manufacturer lines, and the one we recommend depends on your exposure, budget, and energy goals. For Enterprise homes, we often work with PGT, CGI, and ES Windows on the impact-rated and energy-efficient side, along with CWS for standard replacement needs. We don’t claim to stock parts on a truck or keep every model on a shelf – what we do is order the right unit for your opening and get it installed without a long wait. If a brand you’ve heard of isn’t on our list, ask us. We’ll tell you honestly whether it fits your home.
See the difference
Before
After
Before
After
Before
AfterCommon Window Replacement Problems We See in Enterprise Homes
- Failed dual-pane seals on west- and south-facing windows. Ten- to twenty-year-old builder vinyl units fog first on the hot exposures, and the south-valley afternoon sun is what does the damage. Once the seal goes, the unit stops insulating and the haze only gets worse.
- Water intrusion around stucco-clad openings. The original flashing and weatherproofing behind the nail fin degrades over time, and the leak often isn’t visible until the old unit comes out. If the framing behind the stucco is soft, that gets addressed before the new window goes in.
- Out-of-square or damaged framing in tall two-story openings. Tall second-story glazing openings sometimes surface a framing problem mid-job. Once a permit is pulled, that can trigger a code-driven upgrade to the header or framing, which is why we inspect before we order.
- Blowing dust finding its way through worn weatherstrip. The occasional monsoon dust storm pushes fine grit against worn seals, and the infiltration shows up as dust trails and drafts around the sash. Replacing the weatherstrip or the sash closes the gap.
Pricing for Window Replacement in Enterprise, NV
Window replacement in Enterprise runs roughly $600 to $1,200 per window for a standard insert replacement, and $900 to $1,800 per window for full-frame replacement where the rough opening is involved. Larger two-story glazing, low-E upgrades, and any framing or waterproofing repair found once the wall is open add to that. These are typical ranges, not quotes – the written estimate sets the final price, and we don’t move it without your written approval.
What moves the number most is what’s behind the stucco. A clean opening with sound framing is a straightforward install. A failed flashing detail or an out-of-square header changes the scope, and we price that before the work begins rather than after. The estimate is free, and it’s itemized line by line. Call (844) 761-6772 to schedule one.
We Also Serve Cities Near Enterprise
We work across the south valley and beyond, including Spring Valley, Paradise, Winchester, and Las Vegas. If you’re just outside Enterprise, the same inspection-first process applies to your home – we scope the opening, write allowances into the contract, and price any surprise in writing. Call (844) 761-6772 to talk through what your windows need.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Enterprise
A hazy, fogged pane means the seal between the two panes of the insulated glass unit has failed, letting moisture in. In Enterprise, that failure shows up first on west- and south-facing second-story glazing because those exposures take the heaviest afternoon sun load in the south valley. The fix is usually a glass or unit replacement, not a whole new window. Call (844) 761-6772 for a free estimate.
Most cities require a permit for window replacement, so ask your city’s building department about your specific job. In these 2000s-2010s tract homes, pulling a permit can trigger code-driven upgrades if the rough opening shows damaged framing or a header that no longer meets current code. We inspect before we order so that any code-related repair is priced and approved in writing first. Call (844) 761-6772 for a free estimate.
Behind the stucco you’ll find the original nail fin, flashing, and weatherproofing, and on a 10- to 20-year-old unit that detail has often degraded. Pulling the old window can expose water intrusion or soft framing that wasn’t visible from inside. We scope it during inspection and price any repair before the install proceeds. Call (844) 761-6772 for a free estimate.
Yes. Low-E glazing reduces solar heat gain, which makes a real difference on west- and south-facing windows that take the brunt of a 105-115°F afternoon. On a tall second-story window with heavy sun load, the right coating changes how the room feels and how hard the AC works. We can compare glazing options side by side before you decide. Call (844) 761-6772 for a free estimate.
Yes, when the outer frame is still sound. Glass replacement fixes a failed seal, and sash replacement fixes a warped or worn moving assembly, both without pulling the frame. If the frame or the waterproofing behind it is compromised, a full replacement is the more durable call, and we’ll tell you which applies. Call (844) 761-6772 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday; a call then is booked into the next opening.
Written by the team at Jasper Windows & Doors.